內容:

高黏性UV紫外線光固化膠 [UV-000] 配 NERON 395nm紫外線手電筒

使用方法與說明

• 黏合與填補-將UV膠塗抹至黏合或填補位置使用UV燈照乾即可。

• 眼睛點綴-沾取適量UV膠滴於模型眼睛處，可增添水汪汪效果。

• 翻模-將UV膠倒入模具後，照光固化，待冷卻脫模即可使用。

• 本產品適當流動性可用於黏合、縫隙填補、局部翻模、眼睛點綴、水景製作等多種用途。

• UV膠具有高透明度、光照固化快速等特性， 固化後硬度適中，能夠輕鬆打磨修整造型!

使用注意事項

• 作業時，請配戴手套和口罩並注意通風。

• 使用固化燈時應配戴抗UV眼鏡，禁止將光線直接照射眼睛。

• 照乾過程會產生熱能，切勿碰觸避免燙傷。

• 使用UV燈360度照乾，可減低白霧產生。

• UV膠不慎進入眼睛時，應立即用生理食鹽水或清水沖洗，並盡速送醫救治。

• 14歲以下孩童需要由家長陪同操作使用，不可食用。

• 保存期限一年，放置陰涼處，太陽直射可能導致變質。

• 使用後應立即將瓶蓋蓋上。

• 紫外線手電筒使用4號電池 

環保標示: 2號 HDPE

CONTENT

High Adhesive UV Curing Glue + NERON 395nm UV Flashlight

USAGES AND INSTRUCTIONS

• Bond and Fill Apply UV glue into the target area and cure with UV light.

• Eye Chips Apply a drop of UV glue to the model figure's eyes and add a beautiful watery effect.

• Recast Put UV glue into the molding, cure with UV light, allow it to cool down before removing from the mold.

• The viscosity of this product is suitable for bonding, use as a filler, partial molding, eye chips, creating water features, and many more.

• UV Curing Glue has the characteristics of high transparency, and quick to cure under UV light.  Once cured, the moderate hardness allows further sanding and customization with ease.

ATTENTIONS

• Wear protective gloves and mask, and work in a well ventilated area when using this product.

• Wear UV protective eyewear when using the UV Flashlight.  Do not aim the light at the eyes.

• UV curing produces heat.  To avoid the risk of burns and other injuries, do not touch the surface while curing.

• Apply UV light all around the object will minimize haze.

• If you get UV glue in the eye, rinse the eye under saline or water, and seek medical attention immediately.

• Person under the age of 14 please seek parental supervision when using this product.  Not edible; do not eat.

• Shelf life of 1 year.  Store in a cool place.  Direct sunlight may degrade product quality.

• Put the lid back on immediately after use.

• UV Flashlight uses AAA batteries.

RIC: HDPE 2