top of page

D.L.C.

類鑽石塗層刻刀

D.L.C. LINE ENGRAVERS


Z50010DLC (0.1MM)

Z500125DLC (0.125MM)

Z50015DLC (0.15MM)

Z50020DLC (0.2MM)

Z50030DLC (0.3MM)

Z50040DLC (0.4MM)

Z50050DLC (0.5MM)


D.L.C. (Diamond-like Carbon) coating is a protective coating for metal, often used on expensive watches.  When we applied this technology onto our blades, not only did we heighten their hardness, but we also create blades that are low-friction and fretting-resistance.  This means D.L.C. Line Engravers are sharp and easy to handle, taking you to a whole new level of scribing experience.


How-To: Attach the blade to a knife handle.  We recommend Tamiya 74098 or OFLA AK-4, as well as MADWORKS MH-01.  D.L.C. Line Engraver can scribe plastic model kits (ABC/PVC), resin kits, and epoxy kits.  Make sure the blade follow the contour of the scribing surface.  Do not use excessive force.  Excess impact may damage the blade.


CAUTIONS:

  • Children 12 or under must obtain the help of an adult assistant.

  • D.L.C. Line Engraver is a precision tool.  Do not drop and avoid heavy impact.  Under normal operation the blades can last two or more years.

  • Rust treatment has been applied to the metal surface.  Keep in a dry place.  Do not impact with other metal surfaces. Apply silicone grease/oil regularly for rust prevention and maintenance.

  • D.L.C. Line Engraver is designed to be used on plastic / resin / epoxy surface.  Do not use on metal surface as this will damage the blade.


D.L.C（类钻石涂层），是一种金属保护涂层，经常使用在名表上。我们将保护涂层用在刻刀上，不只增加了刀具硬度！并研发出对钢摩擦系数非常低的刀具，进而提升税利度与使用手感！同时也提高了耐磨蚀性，使用后将会有全新的模型制作体验。


使用方式：建议使用田宫（74098）或OFLA（AK-4）的笔刀捍为握把，并使用惯用手拿取，针对塑胶模型（ABS,PVC），树脂模型、环氧树脂，皆可正常使用。建议将刀锋贴平模型零件刻划，请勿过度用力曲折刀锋，会造成刀锋崩坏，影响工具精密度。


注意：

  • 12岁以下孩童需要由家长陪同操作使用

  • 金属精密工具，请勿重摔，正常操作可使用两年以上。

  • 金属工具皆经过表面防锈处理，会依照使用空间环境会有保存的差异，建议保存空间尽量避免湿气。避免与其他金属工具碰撞，容易造成损耗，并定期使用矽油保养防锈。

  • 本工具针对塑胶模型设计，请勿在金属零件上使用。


bottom of page